WHIZOO.COM
Home Profiles Build Guide Hall of Fame Buy Controleo3 Contact Us


Paypal is preferred, and cheaper than eBay! Paying with PayPal gives you automatic buyer protection.

 

Controleo3
⚬ Controleo3 Reflow Oven Controller
⚬ ABS enclosure with UL94-5VA flame rating
⚬ Low-mass K-type thermocouple
⚬ Enclosure screws
⚬ 20" of 1/4" red braided sleeving
⚬ Rubber grommet (3/8" ID, 5/8" OD)
⚬ Custom servo mounting bracket
⚬ 1GB SD card
⚬ $10 coupon to OSH Park
⚬ Discount coupon to OSHStencils

Shipping
USA shipping is USPS First-Class Mail
International shipping is USPS First-Class Package International
Orders are shipped within 2 business days and have tracking numbers


Click for larger image

 

Controleo3 with reflow oven build kit
This kit comes with everything you need to be able to build the reflow oven in the build guide. This kit is designed for smaller non-convection ovens up to 10 liters.
⚬ Controleo3 Reflow Oven Controller
⚬ ABS enclosure with UL94-5VA flame rating
⚬ Low-mass K-type thermocouple
⚬ Enclosure screws
⚬ 1/4" Braided sleeving (20" of red, 10" of black)
⚬ Rubber grommet (3/8" ID, 5/8" OD)
⚬ 1GB SD card
⚬ DEI Reflect-A-Gold insulation (2" x 6 feet)
⚬ DEI Floor & Tunnel Shield II insulation:
    - 10.5" x 8" (1 piece)
    - 10.5" x 6" (2 pieces)
    - 1" x 1" used as tray spacers (2 pieces)
⚬ 8" x 24" of 1/4" ceramic fiber blanket (8 lbs. / cu. ft.)
⚬ High-temperature silicone glue (3 Oz. = 85g)
⚬ 15" of Nomex high-temperature gasket to seal the oven door
⚬ Three 25A 380VAC Solid-state relays (SSR's)
⚬ 100mm x 100mm x 0.5mm thermal silicone pad
⚬ 5052-H32 Aluminum sheets
    - 8"x10-5/8" x 1/32" with 1/4" flange for PCB tray
    - 6" x 6" x 1/16" with 1" flange to mount SSR's
    - 1 1/2" x 3" x 1/32" for attaching Controleo3 to the oven chassis
    - 1/2" x 3" x 1/32" for the oven door servo
⚬ Servo kit
    - Powerful MG996R servo to open the oven door
    - Custom servo mounting bracket
    - Custom "bird's beak" servo arm
    - Aluminum servo disk with four M3-.5x5mm phillips screws
    - Miscellaneous servo hardware, including mounting screws
⚬ 5V 2A power supply
⚬ Stainless steel resistive heating element. Either
    - 350W@110V (400W@120V) or
    - 450W@220V (535W@240V)
⚬ Two 3/16" x 1 1/2" eye bolts with locking nuts
⚬ Ten #6-32 x 1/2" Phillips truss head machine screws with locking nuts
⚬ Eight #4 x 5/16" Phillips pan head sheet metal screws
⚬ 30" of 18 gauge 4-conductor wire
⚬ 20" of 18 gauge high-temperature silicone wire
⚬ Selection of zip ties
⚬ Heat shrink tubing (10mm and 6mm)
⚬ Six ring terminal crimps, two female spade crimps and a butt connector
⚬ $10 coupon to OSH Park
⚬ Discount coupon to OSHStencils
Click for larger image

Shipping
USA shipping is USPS Priority Mail
International shipping is USPS First-Class Package International
Weight of the kit is 4lbs (1.8 kg)
Orders are shipped within 2 business days and have tracking numbers


Controleo3 with convection oven build kit
The fan in convection ovens helps a small amount towards even heat distribution, but the primary reason to choose a convection oven is for the larger size. This means you need more of everything, especially insulation. They also require a narrower piece of aluminum to mount the SSR's because the convection fan takes up a lot of space in the oven's control chamber. We also supply everything you need to be able to control the convection fan.

Changes to the above reflow oven build kit:
⚬ Remove
    - Remove 6" x 6" x 1/16" aluminum sheet with 1" flange
    - Remove 8" x 24" of 1/4" ceramic fiber blanket
    - Remove 30" of 18 gauge 4-conductor wire
⚬ Additions
    - Add two 3" x 8" x 1/16" sheets of aluminum
    - Add wider 10" x 24" of 1/4" ceramic fiber blanket
    - Add 2nd piece 10" x 12" of 1/4" ceramic fiber blanket
    - Add 36" of 18 gauge 6-conductor wire
    - Add 5" of Nomex high-temperature gasket, for a total of 20"
    - Add 4 feet of Reflect-A-Gold insulation, for a total of 10 feet
    - Add two more 10.5" x 8" pieces of Floor & Tunnel Shield II
    - Add SSR relay module for convection fan and stand-offs
    - Add custom 4" x 5" C-bracket for mounting SSR's
    - Add 4 more #6-32 x 1/2" machine screws with locking nuts, for a total of 14
Click for larger image

Shipping
USA shipping is USPS Priority Mail
International shipping is USPS Priority Mail International (faster)
Weight of the convection kit is 5lbs (2.3 kg) Orders are shipped within 2 business days and have tracking numbers


 

Reflow oven ready-to-run
Ready-to-run ovens are available. These are built according to the build guide, and have been tested and calibrated for lead-free solder paste so that they are ready to reflow your boards. Shipping is only available to USA and Canada.

Shipping
USA shipping uses USPS
Canadian shipping is USPS Priority Mail International (faster)
All orders have tracking numbers


 

Taxes
California residents are charged 8.75% sales tax. International customers are responsible for taxes (import duty, VAT and sales tax) imposed by their countries. Packages are marked as "for testing and evaluation", and typically get through customs quickly and easily.

 

Warranty
All products are backed by a 1-year parts and labor warranty.